“The foundation of your home is your walls. The weather out there won’t be good for the exterior walls of your house. It’s not enough to paint the wall. After dealing with rain, snow, wind, dust and heat of the outside environment, the paint will start peeling off.”
Thus, waterproofing is the best way to ensure that your walls are protected and retain your house’s longevity. At the same time, it is vital to reduce your frequent renovation cost. So, here are some of the simple steps for providing effective waterproofing solutions to your home.
Damp carpets and beneath wall coverings can be the most prominent place for mold and mildew growth. Finishing a basement without first dealing with the moisture problems can make health conditions worse and lead to significant damage. Interior waterproofing systems, installed by a professional contractor, can keep the moisture away throughout the home.
Step 1: Properly expose the outside part of the wall
To start with waterproofing your exterior walls, make sure it is properly exposed to work on. Your house walls possess a lot of dirt, which creates an additional layer over the wall. Get rid of all the filth and dust from the walls. And before doing so, remove all the drainage pipes and the old field tiles to get proper access to every corner and area of the wall.
Step 2: Thoroughly clean the walls
A lot of dust and dirt is carried by air and sticks onto the outer part of your home. To ensure the efficiency of the process, you need to clear the debris and dust thoroughly. The dirt and debris should be cleaned with a broom, brush, or sandpaper. Then wash it with a power washer.
Step 3: Check out for the cracks and fill them up
Cracks and holes can be found over time on your exterior walls. Follow up the cleaning process with a thorough finding of all the cracks and holes on the wall. Simply fill them with cement.
Most of the homeowners get worried about cracks in the foundation. But the fact is, not all foundation cracks affect the home’s structural integrity. Sometimes cracks can be caused by shrinkage during the concrete curing process. These unsightly, non-structural shrinkages, commonly known as hairline cracks, don’t put your home in immediate danger. But on the other hand, structural cracks are serious business.
All over the internet and TV you find websites and programs with step-by-step guides of DIY foundation repair. But the truth is that a foundation should not be experimented on in a DIY project. Foundation repair requires years of experience and specialized tools. When it comes to foundation repair, contact a foundation repair expert.
The mixture of cement penetrated inside the cracks and sealed them. Make sure to remove the loose cement from the wall before applying the cement.
Step 4: Add a layer of cement waterproofing sealer
To make sure your wall is waterproof, you need to apply a cement waterproofer. After applying the cement in the crevices of the walls, let it dry and then apply the waterproof paint seal. Allow it to be dry.
Step 5: Pick the right water-proofer
There are a lot of products that are waterproof. You have to pick the one that goes with the wall you have. Pick the water-proofer based on whether the wall is concrete or silicate.
You can choose between a concrete coating, paint, or seal. You can add strength to your walls with a plaster waterproofing Additive.
Step 6: Apply the water-proofer
Use a roller or brush to apply the water-proofer to the walls. Give a thin coat first, if you want to apply more than one layer. Add the second coating after the first one has dried.
Step 7: Apply tar and heavy-duty membrane
“If you want to add more strength to the layers, you need to use a tar-based pitch after you’ve dried the cement. It should be applied to your exterior wall.”
After that, you need to apply a heavy-duty plastic or rubber membrane, which will ensure the proper care of the walls.
Step 8: Consider adding gravel
To lay the drainage pipes, you need a base beneath the footer. The drainage pipes will get adequate support from a 34-inches gravel base. Gravel is long lasting and provides better protection.
You need to lay the drainage pipe-cover along with gravel. The gravel should be level near the footer. A covering for the pipe should be at least 3 inches.
Step 9: Add a fabric barrier
Attach a fabric barrier to the pipe. Ensuring a fabric barrier is going to prevent the formation of dirt and keep your system running. Simply back-fill the trench and build the top of the dirt relatively high and allow it to settle for a while. Slope the ground away from the walls for the run-off after youTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkiaTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkiaTrademarkia isTrademarkia isTrademarkiaTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia isTrademarkia
Conclusion:
Your home will have a new life if it is waterproof. If you want good waterproof solutions for your walls, Magicrete can help you. At a very low and affordable price, Magicrete can help you with your outdoor needs.
“It’s not like it’s like it’s like it’s like it’s like it’s like it’s like it’s like it’s like it’s like it’s like it’s like it’s”
